The appropriate total energy for Titanium Lifting can vary depending on face size, skin elasticity, treatment area, and desired management direction. For full-face treatment, various energy levels such as 40KJ, 60KJ, and 80KJ can be used. The important thing is not to unconditionally use high KJ, but to distribute sufficient energy to the areas that need it on the current face. At Kkeut Oriental Medicine Clinic Konkuk University Branch, the total energy is determined after checking the skin condition, face size, jawline, and lower face, as well as the areas you want to focus on.

The biggest difference between 60KJ and 80KJ is the cumulative total energy that can be used during a single treatment. 80KJ does not necessarily mean stronger irradiation at one point. As the total energy increases, you can expand the treatment area of the entire face or allocate additional energy to areas you want to manage intensively, such as the jawline and lower face. If the face is small and the treatment area is limited, 60KJ can be planned, and if the face area is wide or you want to manage several areas together, 80KJ can be considered. However, the appropriate KJ may vary depending on the individual's facial condition.

Titanium Trinity Lifting simultaneously uses three diode laser wavelengths: 755nm, 810nm, and 1064nm. 755nm penetrates relatively shallowly among the three wavelengths and has high absorption for melanin. Energy is mainly delivered to relatively shallow skin layers, including the epidermis and upper dermis, making it useful when considering skin tone and changes in the skin surface. 810nm penetrates deeper than 755nm and has a good balance of energy absorption and penetration depth. Energy is mainly delivered from the middle dermis to relatively deep dermis, making it useful when considering skin elasticity and tightening together. 1064nm has the characteristic of penetrating relatively deepest among the three wavelengths. Energy can be delivered to deep dermis and subcutaneous tissue, making it useful for areas like the jawline or lower face where deeper layers need to be considered. Since the three wavelengths have different penetration depths and absorption characteristics in tissues, the feature of 3-wavelength Titanium Trinity Lifting is that it can simultaneously consider various depths from the epidermis to the dermis, rather than focusing on only one skin layer.

When receiving repeated Titanium Lifting treatments, it is common to proceed with an interval of approximately 2-3 weeks. It is recommended to allow sufficient time for the skin to react and change after the treatment before proceeding with the next session. However, the 2-3 week interval is a general guideline and does not apply equally to everyone. The appropriate treatment interval can vary depending on skin condition, total energy used, treatment area, and skin reaction after previous treatments. At Kkeut Oriental Medicine Clinic Konkuk University Branch, we generally consider an interval of about 2-3 weeks but adjust the timing of the next treatment after checking the skin condition after the previous treatment.

Titanium Trinity Lifting delivers energy while cooling the skin surface during the procedure, which can help reduce the burden of heat or pain. It is generally performed without separate anesthesia, but the degree to which one feels pain and heat varies from person to person. There may be differences in the perceived sensation depending on skin sensitivity, treatment area, and total energy.

Titanium Lifting has very little downtime, making it a good lifting procedure for immediate return to daily life right after the treatment. It is not a procedure where severe swelling or bruising commonly occurs, and because energy is delivered while cooling the skin surface, the post-treatment burden is relatively low. Temporary redness or heat sensation may appear depending on the individual. Furthermore, a major advantage of Titanium Lifting is that patients often experience a relatively quick sensation of tightened and firm skin, and a more refined jawline and facial contour right after the treatment. In other words, it is a treatment with high satisfaction for those who want quick tightening and contour changes without a long recovery period. However, the actual perceived degree and duration may vary individually depending on skin condition, facial structure, treatment area, and total energy.

In some cases, even a single treatment can make the skin feel tightened and firm, or the facial lines become more defined. However, Titanium Lifting is not meant to be a one-time procedure but rather a concept of continuously managing skin elasticity and facial lines. Since skin aging and loss of elasticity continue, if you wish to maintain more stable changes, you can consider repeated treatments at regular intervals. When performing repeated treatments, it is better to adjust the treatment area and total energy after checking the skin reaction and changes from the previous treatment, rather than mechanically applying the same energy every time. In other words, while you can feel changes with a single treatment, continuous treatments can be beneficial for consistent elasticity and contour management.

Titanium Lifting generally allows patients to feel a relatively quick sensation of tightened and firm skin, or a more refined jawline and facial contour right after the treatment. The 3-wavelength diode laser energy (755nm, 810nm, 1064nm) delivers heat to the skin, inducing a tightening reaction. Therefore, when looking in the mirror immediately after the treatment, some people may feel that their facial lines look a bit clearer or their skin feels tauter. Afterwards, as the thermal reaction in the skin tissue continues, changes in elasticity and facial lines may appear gradually. Therefore, a strength of Titanium Lifting is that you can expect both immediate tightening and subsequent progressive changes in elasticity. However, the actual perceived degree of change and its duration may vary individually depending on skin condition, facial structure, treatment area, and total energy.

Titanium and Onda use different energy methods. Titanium Trinity utilizes three diode laser wavelengths (755nm, 810nm, 1064nm) to address skin elasticity, skin tone, and facial contours together. Onda Lifting uses 2.45GHz microwave energy and 3mm/7mm handpieces to address not only skin elasticity but also facial fat distribution. Therefore, the treatment direction may vary depending on whether your main concern is skin elasticity and tone, or if you also need to consider fat distribution in the double chin and lower face.

Depending on your facial condition, combining Titanium Trinity and Onda Lifting can also be considered. Onda can be used for areas where you want to consider the fat layer, such as the double chin or lower face, while Titanium Trinity can be used for skin tightening, skin tone, and overall facial contouring. Since the two treatments use different energy methods, they can be planned together according to your individual facial condition and desired treatment direction. However, it is not necessary for everyone to receive both treatments, and the decision to combine them is made after checking skin condition, facial volume, and fat distribution.

Even if you have little facial fat, Titanium Lifting can be considered depending on your skin condition and desired treatment direction. However, if your face is thin or lacks volume, it is important to determine the treatment area and energy distribution considering your existing facial volume, rather than repeatedly applying energy uniformly to the entire face. At Kkeut Oriental Medicine Clinic Konkuk University Branch, we develop a treatment plan by dividing areas to be focused on and areas to be preserved after checking facial volume and skin elasticity.

When comparing Titanium Lifting, total KJ is one important criterion, but it is difficult to judge all actual treatment details based solely on KJ. Even for the same 60KJ, the actual treatment method can vary depending on how the energy is distributed across the entire face and how intensively problem areas like the jawline and lower face are treated. Therefore, it is recommended to check the treatment area, facial design, and energy distribution by area, along with the total energy amount.